Large caliber head storage, don't ignore these problems

Large diameter head, more used in petrochemical, aerospace, nuclear power and other emerging fields, the above areas of head often to withstand high pressure, high temperature or storage of corrosive media, more stringent quality requirements. Large-caliber head purchase, in addition to choosing our Stida head such a reliable head manufacturers long-term cooperation, after receiving the goods, before the installation of the head temporary storage process, please be sure to pay attention to the following key issues.

First, environmental control is the key

The high temperature and high humidity environment will accelerate the oxidation and corrosion of the head material, and the impurities in the air may adhere to the surface of the head, affecting its sealing performance. Therefore, the storage environment of the head must be dry, ventilated, and away from corrosive gases and dust. You are advised to select a proper warehouse or indoor place and equip it with necessary temperature and humidity control devices.

Second, protective measures are indispensable

In order to prevent the head from being damaged during storage, certain protective measures should be taken. Clean soft materials can be used to cover the surface of the head to reduce direct contact with external factors. The effectiveness of protective measures should be checked regularly to ensure that the head is always in a safe state.

Third, classified storage, to avoid confusion

The heads of different materials and specifications should be classified and stored to avoid mutual interference between materials. Classified storage helps to maintain the original performance of the head and prevent problems such as scratches, deformation or contamination caused by mixing. You are advised to clearly label the category, specifications, and production date of each head before storing it, facilitating subsequent management and use.

4. Check again before use

Before the use of the head, it is also necessary to carry out strict inspection of the large diameter head. Ensure that the appearance of the head is intact, and there is no obvious scratch or corrosion on the surface. If any problem is found, handle it in time to ensure that the head can work properly after installation.

Stara head once again reminds you that you must pay attention to the storage of the head to ensure the stable operation and long-term safe use of the head products. In the use of any other questions, also welcome to contact Stara head, we are always online, for you to answer questions.